Upgrading Vistex Software
Below find the latest Vistex release for your system. Can’t find what you’re looking for? Contact Vistex.
SAP S/4HANA
Vistex only has one version of software for each SAP S/4 version. The correlated Vistex software version must be used with the SAP S/4 software. This means that the Vistex software version must be upgraded at the same time as the SAP S/4 software so that the versions match. Vistex software is delivered as SAP Add-On components, and standard SAP tools are used to upgrade the components.
Latest Vistex Release by SAP Release:
| SAP Release | Vistex Release |
|---|---|
| S/4HANA 2021 | V/4 2021 |
| S/4HANA 2020 | V/4 2020 Version 2 |
| S/4HANA 1909 | V/4 1909 |
| S/4HANA 1809 | V/4 1809 Including Support Package 1 |
| S/4HANA 1709 | V/4 1709 Including Support Package 1 |
S/4 Upgrade/Migration SAP Notes:
- 3072241 – Vistex Release V/4 2020 Version 2 Solutions Installation/Upgrade on S/4HANA OP 2020
- 3018664 – Vistex IP and DM Module Conversion to Release V/4 2020 on S/4HANA OP 2020
- 3018199 – Vistex Release V/4 2020 Solutions Installation/Upgrade on S/4HANA OP 2020
- 2948966 – Vistex IP and DM Module Conversion to Release V/4 1909 Version 2 on S/4HANA OP 1909
- 2948952 – Vistex Release V/4 1909 Version 2 Solutions Installation/Upgrade to S/4HANA OP 1909
- 2871743 – Vistex IP and DM Module Migration to Release V/4 1909 on S/4HANA OP 1909
- 2871702 – Vistex Release V/4 1909 Solutions Installation/Upgrade to S/4HANA OP 1909
- 2738137 – Vistex IP and DM Module Migration to Release V/4 1809 on S/4HANA OP 1809
- 2738108 – Vistex Release V/4 1809 Solutions Installation/Upgrade to S/4HANA OP 1809
- 2844584 – Vistex V/4 1809 V4CORE Support Pack Installation
- 2638371 – Vistex IP and DM Module Migration to Release V/4 1709 on S/4HANA OP 1709
- 2635539 – Vistex Release V/4 1709 Solutions Installation/Upgrade to S/4HANA OP 1709
- 2690555 – Vistex V/4 1709 V4CORE Support Pack Installation
Other Upgrade Information:
- The software is available on the SAP Support Launchpad
- The software add-ons are upgraded using the SUM/SAINT tool
- The available support packages should be included in the SUM/SAINT queue along with the add-ons
- Pre and Post processing steps are required; see Upgrade SAP Note for more information
- Migrating to SAP S/4HANA? You will also need to migrate your embedded Vistex solutions. Learn More
SAP ECC 6.0
Vistex recommends that you upgrade your software in a timely manner to stay current with the latest functionality and corrections, and also to minimize the risk of the maintenance ending for an older release. The latest Vistex release for Incentives & Paybacks (IP) is Release 6.1, however SAP ECC 6.0 EHP5 is required at a minimum. Release 60D is the latest release for SAP ECC 6.0 systems with EHP4 and below. Vistex software is delivered as SAP Add-On components, and standard SAP tools are used to upgrade the components.
Latest Vistex Release by SAP Release:
| SAP Release | Vistex Release | Latest Support Package |
|---|---|---|
| SAP ECC 6.0 EHP5 and higher | Release 6.1 | No Others Planned |
| SAP ECC 6.0 EHP5 and higher | Release 60E | SP7 |
| SAP ECC 6.0 EHP4 and lower | Release 60D | SP5 |
| ECC 5.0 | Release 40C | SP1 No Others Planned |
| R/3 4.7 | Release 40C | SP1 No Others Planned |
| R/3 4.6 | Release 30B | SP9 No Others Planned |
Upgrade paths to Release 6.1:
- From 60E (any support package level) –> Upgrade from 60E to 6.1
- From 60D (any support package level) –> Upgrade to Release 60E > Upgrade from 60E to 6.1
Upgrade paths to Release 60E:
- From 60D (any support package level) –> Upgrade from 60D to 60E
- From 60C (any support package level) –> Apply support packages to Release 60C to reach 60C SP2 level –> Then upgrade from 60C to 60E
- From 60A (any support package level) –> Upgrade to Release 60C –> Then upgrade from 60C to 60E
Upgrade Paths to Release 60D:
- From 60C (any support package level) –> Apply support packages to Release 60C to reach 60C SP2 level –> Then upgrade from 60C to 60D
- From 60A (any support package level) –> Upgrade to Release 60C –> Then upgrade from 60C to 60D
Upgrade SAP Notes:
- 3030972 – Master Install Guide for Vistex Incentives and Paybacks & Data Maintenance v6.1
- 3030993 – Vistex IP & DM Module Upgrade to Release 6.1 for ECC 6.0 w/ EHP5 and higher
- 1798943 – Vistex IP Module Upgrade to IRMIPM Release 60E
- 1911288 – Vistex IP 60E Support Pack Installation for ECC 60
- 2409462 – Vistex IRMVUI 60E Installation for Fiori Applications
- 1633399 – Vistex IP Module Upgrade to IRMIPM Release 60D
- 1612492 – Vistex IP 60D Support Pack Installation for ECC 60
- 1678499 – Vistex IP 60D Language Installation Note
- 1428710 – Vistex IP Module Upgrade to IRMIPM Release 60C
- 1462231 – Vistex IP 60C Support Pack Installation for ECC 60
*Software corrections are no longer delivered in the form of an SAP note, based upon the discretion of the support organization.
Vistex is committed to supporting SAP Solution Extensions by Vistex for SAP Business Suite until 2030. This will ensure that your SAP landscape that includes Vistex add-ons maintains continuity of support—in the same manner that you have a seamless user experience with SAP and Vistex partner solutions.
Other Upgrade Information:
- The software is available on the SAP Support Launchpad
- The software add-ons are upgraded using the SUM/SAINT tool
- The available support packages should be included in the SUM/SAINT queue along with the add-ons
- Pre and Post processing steps are required; see Upgrade SAP Note for more information
- Migrating to SAP S/4HANA? You will also need to migrate your embedded Vistex solutions. Learn More
Looking for Release Notes?
Vistex Release Notes have been moved to the Vistex Academy.
Login or register today
